|
Feature
1. 3.1-megapixel 12x optical
model in a compact body
The LUMIX DMC-FZ3 digital
camera is equipped with a 3.1
mega effective pixels CCD and
LEICA DC VARIO-ELMARIT lens
offering 12x optical zoom
(equivalent to 35 to 420mm with
a 35mm film camera) with F2.8
aperture throughout the entire
zoom range. The combination of
3 aspherical lenses generates
high optical performance while
preserving the compactness of
the unit. The zoom range can be
totally extended to 48x when
combined with 4x digital zoom.
2. Upgraded MEGA O.I.S. offers
clear, sharp images in difficult
situations
MEGA O.I.S., which we
strongly believe indispensable
for a high-magnification model,
is subsumed with 2 selectable
modes. In Mode 1, the O.I.S.
lens continuously compensates
the vibration, and in all
Panasonics own Mode 2, the
O.I.S. lens suppresses
hand-shake only at the moment
the shutter button is pressed.
In this mode, the lens can move
in all directions at the moment
to maximize its effect, and
higher-resolution image can be
taken by capturing the image as
close as to the center of the
lens. Venus Engine II also
encourages this advantageous
performance in the point of
enhancing the accuracy of
hand-shake detection, which
allows you to use the 1-step
slower shutter speed than that
of the models with previous
Venus Engine. Consequently,
even without using a tripod, it
allows you to reduce the shutter
speed 3 or 4 steps compared to
the conventional cameras without
O.I.S., while assuring clear
images.
Its outstanding benefit can
be reaffirmed especially with
the shootings in telephoto, in
low light or in macro.
3. With greatly improved
resolution and response, the
world's highest level
performance: the Venus Engine II
Panasonic has achieved great
improvements in both resolution
and response compared to the
performance of previous Venus
Engine. The previous Venus
Engine, the luminance signal is
extracted from all RGB pixels to
improve the diagonal resolution
by 50%. In addition to that,
the newly developed Venus Engine
II gains new imaging process
which adds the luminance signal
extracted only from the G pixels
upon detecting the horizontal /
vertical lines in the image.
This results in the improvement
of the horizontal and vertical
resolution by more than 10%
compared to the former Venus
Engine, while maintaining the
50% in the diagonal resolution.
Besides, the amount of the noise
reduction is controllable
according to the brightness
level of each subject in the
image, which reduces the noise
in the dark areas as low as 1/3
without affecting the resolution
in bright areas of the image.
Thanks to the further improved
multi-task image processing,
response has also been
accelerated, resulting in the
industry-leading release time
lag approx. 0.008 sec minimum
and a shutter interval* of
approx. 0.3 sec for achieving
more stress-free operation. It
also boasts high consecutive
shooting performance, providing
shooting at 4 frames/second at
full resolution. Newly
installed Infinite Consecutive
Shooting function*2
allows limit-free consecutive
shooting up to the capacity of
the memory card.
*1Not
including the time for AF.
*2The
speed of the consecutive
shooting varies depending on the
memory card.
The number of recordable
picture depends on the memory
card size, battery life, picture
size,
and compression.
4. Enhanced AF and light
metering options
With the DMC-FZ3, an AF method
can be selected according to the
shooting situation: 9-point AF,
3-point AF, 1-point AF, or spot
AF. Meanwhile in the 3-point AF,
high-speed AF is achieved by
obtaining the focus information
from the CCD by double
frequency. In addition, AF
assist lamp is newly equipped
for expanding the AF ability
even at night or under the
low-light conditions.
For the light metering, center
weighted metering can newly be
selectable in addition to the
intelligent multiple metering
and spot metering.
5. High-end usability
satisfies a wide range of
photographers
Manual functions such as
aperture-priority AE,
shutter-priority AE or manual
exposure, which were previously
selected from menu screen are
now be selectable directly by
the mode dial for the smooth
control. On the other hand, it
also offers easy shooting even
to the entry-level users by
providing the simple mode with
backlight compensation. Thus,
DMC-FZ3 is capable of meeting a
wide range of graphic needs.
In addition, Newly adopted OSD
supports easy-to-follow
operation. Now 9 varieties of
scene mode including Fireworks,
Party, Landscape and Night
Landscape(separated from Night
Portrait mode) assist shooting,
by selecting one from the
on-screen menu according to the
wide-ranging situation. Soft
skin detail function works in
portrait and night portrait
modes detecting only skin tones
and softens detail to produce
smooth and beautiful skin.
Last but not least, the EVF
magnification is extended from
7.6x up to 11x to afford a
larger view and now you can save
the majestic image in
non-compressed TIFF file
format.
Combining the latest advances in
optical and digital
technologies, the LUMIX DMC-FZ3
opens the door to a new level of
creativity.
|